|
|
|
Cross Reference Chart:
Furnas (96M) and Reliance Electric (Shark XLII) cross reference to the original Hitachi PLCs part numbers. Posted 4/2/2002
Please be patient if it takes a moment to load, there is a lot of information here...
In 1987 HITACHI began producing the EM-Series PLC. This "Card and Rack" - or "Modular System" was an instant success in the industrial marketplace. By 1990, the EM had evolved into the EMII. Now, with expanded I/O options and a "supped-up" processor, industry professionals around the globe were taking notice.
During this time, Reliance Electric and Furnas Electric made the decision to brand label the EMII and sell them as their own. For Reliance, the EMII became the "Shark XLII". Reliance had been re-labeling the by now famous "E-Series" calling it the "Shark X". So the Shark XLII became the big brother to the Shark X.
Furnas Electric chose to re-labeled a product similar in appearance with the "E", but housing the same high-powered processor as Hitachi's Large H-Series. The Hitachi "H-Board" became the Furnas 96MFM. Furnas did not re-label the E-Series. Later, they did re-label the EMII which became their "96M-Series" PLC.
Both Reliance and Furnas did good jobs marketing the EMII/96M/Shark XLII PLC. You may be among the many satisfied customers who chose this product for your plant, or were happy to find it controlling a new piece of machinery. This product has found itself in virtually every corner of the globe!!!
As you are probably aware, Reliance was bought out by Rockwell Automation (Allen-Bradley), and Furnas was bought out by Siemens/TI. Naturally, these giants opted to market their own highly successful PLCs through the existing distributor chains rather than brand and market the Hitachi products.
BUT, this is not the end of the story for the EMII. In 1995, with the merging of two Hitachi manufacturing facilities, the powerful "H-Series" processor (mentioned earlier) found its way into the EMII platform. This "merger" was to bring this already healthy product to a new plateau. This new powerhouse is known as the H200/250/252. Now with 5 CPU's to choose from, and with even more I/O than before, the EMII will be in service for some time to come!
UPDATE: 3/1/2007 - Hitachi has announced a STOP IN PRODUCTION for the EMII series. Please click here for details.
UPDATE: 3/6/2009 - Hitachi has announced there will be a replacement Power Supply called PSM3-A available once the existing stock of PSM2-A has been depleted. This new P.S. will replace all previous models of PSM-A and PSM-B for the EM/EMII/H200-250-252.
|
RELIANCE |
FURNAS |
HITACHI |
DESCRIPTION |
|
45C910 |
96MRK03 |
BSM-3A |
3-Slot Rack |
|
45C911 |
96MRK04 |
BSM-4A |
4-Slot Rack |
|
45C912 |
96MRK05 |
BSM-5A |
5-Slot Rack |
|
45C913 |
96MRK06 |
BSM-6A |
6-Slot Rack |
|
45C914 |
96MRK07 |
BSM-7A |
7-Slot Rack |
|
45C918 |
96MRK08 |
BSM-9B |
9-Slot Rack |
|
Rack slots count shown is useable slots. The power supply does NOT consume a slot address. NOTE: H200/250/252 processors *can* use these racks. For *High* Functions, use BSH racks instead (available in 3,5,7, & 10 slots) | |||
|
RELIANCE |
FURNAS |
HITACHI |
DESCRIPTION |
|
45C920 |
96MPS01 |
PSM2-A2 |
Wide Range Power Supply |
|
45C921 |
96MPS02 |
PSM-D |
24VDC Power Supply |
|
45C922 |
96MPS03 |
PSM2-B |
Selectable (100-132VAC) or (170-264VAC) Power Supply |
|
Each rack requires a power supply. The choice of power supply is determined by summing the current requirement of each (I/O) module. | |||
NOTE: Please see UPDATE above concerning PSM3-A Replacement Power Supply!
|
RELIANCE |
FURNAS |
HITACHI |
DESCRIPTION |
|
45C900
|
Not Produced |
CPM-E |
Original EM processor 5mS/command (obsolete) |
|
Not Produced
|
96MPR01 (96MPR01M units shipped with memory) |
CPM-E2 |
Basic EMII processor 1.5mS/command; 160I/O |
|
45C901
|
96MPR02 (96MPR02M units shipped with memory) |
CPM-E3 |
Deluxe EMII processor 1.5mS/command; 160 I/O; real-time clock; RS232 port |
|
Not Produced |
96MPR03 |
CPU-02H |
H200 Processor 1.5mS/command; 512 I/O; w/ 7.6k Step RAM; 19.2kps |
|
NOTE for 96MPR03 (H200) Users: The H200(Furnas 96MPR03) utilizes the same base, power supply and digital I/O as the EMII Series. However some of the "specialty" I/O such as High Speed Counters and Analog I/O are made in two versions - one for the H200 and one for the EMII Series. An example is the High Speed Counter Module: CTH is for use with H200, CTM for use with the EMII. Furnas (for some unknown reason) did not include the I/O for the H200 in their catalog. Reliance was going to introduce the H200 as the Shark XLIII, but was acquired (by Rockwell Automation) before this materialized. | |||
MEMORY
|
RELIANCE |
FURNAS |
HITACHI |
DESCRIPTION |
|
45C975 |
96MMP01 |
MPM-1E |
EEPROM, 1K Words |
|
45C977 |
96MMP03 |
MPM-2E |
EEPROM, 2K/4K* Words |
|
Not Produced |
96MMP02 |
MPM-2R |
EPROM, 2K/4K* Words |
|
* Memory Modules mount on the processor module. Furnas Electric included the memory | |||
|
RELIANCE |
FURNAS |
HITACHI |
DESCRIPTION |
|
45C940 |
96MDE03 |
PIM-A |
8pt AC INPUT |
|
45C941 |
96MDE04 |
PIM-AH |
16pt AC INPUT |
|
45C942 |
96MDE04R |
PIM-AW |
16pt AC INPUT (*)RTB |
| Not Produced |
96MDE01 |
PIM-D |
8pt DC INPUT - Source |
| Not Produced |
96MDE02 |
PIM-DH |
16pt 24 VDC INPUT - Sink |
| 45C947 |
96MDE02R |
PIM-DW |
16pt 24 VDC INPUT - Sink (*) RTB |
|
45C944 |
Not Produced |
PIM-DP |
8pt DC INPUT - Sink |
|
45C946 |
Not Produced |
PIM-DPH |
16pt 24 VDC INPUT - Source |
|
Not Produced |
Not Produced |
PIM-DPW |
16pt 24 VDC INPUT - Source - (*)RTB |
|
45C957 |
96MEL01 |
PHM-TT |
16TTL Input (4-27VDC); 16TTL Transistor Output (4-27VDC) (Open Collector) |
|
45C958 |
Not Produced |
PHM-DT |
8pt 24VDC Input; |
|
45C960 |
Not Produced |
POM-S |
8pt TRIAC Output Module, |
| 45C961 |
96MDL04 |
POM-SH |
16pt TRIAC Output |
|
45C965 |
96MDL04R |
POM-SW |
16pt TRIAC Output (85-264VAC) (*) RTB |
| 45C948 |
|
POM-TW | 16pt 24VDC Transistor Output, Sink Type (*) RTB |
|
Not Produced |
Not Produced |
POH-TM |
32pt 24VDC Transistor Output, Sink (*) RTB |
|
45C962 |
Not Produced |
POM-TP |
8pt 24VDC Transistor Output, Source Type |
| 45C963 |
Not Produced |
POM-TPH |
16pt 24VDC Transistor Output, Source Type |
|
45C964 |
96MDL08R |
POM-TPW |
16pt 24VDC Transistor (3-26VDC) source type (*)RTB |
|
45C966 |
96MDL01 |
POM-RB |
8pt Relay Output |
|
45C968
|
96MDL03R |
POM-RBC |
8 ISOLATED Relay Output |
|
45C969
|
Not Produced |
POM-RCL |
8 ISOLATED Relay Output - Low Power |
| 45C967 |
96MDL02 |
POM-RBH |
16pt AC/DC Relay Output |
|
45C959 |
96MDL02R |
POM-RBW |
16pt AC/DC Relay Output (*)RTB |
|
RELIANCE |
FURNAS |
HITACHI |
DESCRIPTION |
|
45C990 |
96MAE01 |
AGM-I |
8-point 4-20 mA Analog Input |
|
45C992 |
96MAE02 |
AGM-IV |
8-point 0-10V Analog Input |
| Not Produced | Not Produced |
AGM-IV2 |
8-pt Input (12bit resolution) - selectable Current or Volt |
| Not Produced |
96MAE03 |
Actana-2 † |
4 Analog IN - 2 Analog OUT - selectable Current or Volt |
|
45C993 |
Not Produced |
AGM-OD |
2 point 4-20 mA Analog Output |
|
45C994 |
Not Produced |
AGM-ODV |
2 point 0-10 V Analog Output |
|
45C995 |
96MAL01 |
AGM-O |
4 point 4-20 mA Analog Output |
|
45C997 |
96MAL02 |
AGM-OV |
4 point 0-10V Analog Output |
| Not Produced | Not Produced | AGH-I | 8-channel Analog Input- 4-20mA |
| Not Produced | Not Produced | AGH-IV | 8-channel Analog Input- 0-10V |
| Not Produced | Not Produced | AGH-IV2 | 8-channel Analog Input (12bit resolution) - selectable Current or Voltage |
|
† Manufactured by Actron A.B. AGM Modules listed above for use ONLY with EM/EMII Series. AGH Modules listed for use ONLY with H200/250/252 Series. | |||
|
RELIANCE |
FURNAS |
HITACHI |
DESCRIPTION |
|
45C987 |
96MRS03 |
IOLM-T |
CPU Linkage Module (Twisted Pair Cable), Up to 8/Modules per linkage, 8 words, 766kbits/sec. (EMII) |
|
45C988 |
96MRS01 |
RIOM-TM |
Remote I/O Module (Master Station, Twisted Pair Cable), Max 8 local stations, total 128 I/O, 768kbits/sec. |
|
45C989
|
96MRS02 |
RIOM-TL |
Remote I/O Module (Local Station, Twisted Pair Cable), 768kbits/sec. |
| Not Produced | Not Produced | IOLH-T | CPU Linkage Module (Twisted Pair Cable), Up to 8/Modules per linkage, 8 words, 766kbits/sec. (H200) |
| Not Produced | Not Produced | RIOH-TM | Remote I/O Module (Master Station, Twisted Pair Cable), Max 8 local stations, total 128 I/O, 768kbits/sec.(H200) |
| Not Produced | Not Produced | RIOH-TL | Remote I/O Module (Local Station, Twisted Pair Cable), 768kbits/sec. (H200) |
|
One network module is required for each rack which is connected to the network. One remote I/O master is required per network, and each remote rack requires a remote I/O target module. | |||
|
RELIANCE |
FURNAS |
HITACHI |
DESCRIPTION |
|
45C982 |
96MHC01 |
High-Speed Counter Module (10KHz Max) | |
|
Not Produced |
96MHC02 |
High-Speed Counter Module(10kHz) 16 bit (H200) | |
|
Not Produced |
Not Produced |
POSH |
2 Axis Positioning Module, Pulse Output (H200 |
|
Not Produced |
Not Produced |
SIH |
RS-232C X 1 channel Serial I/O Module (H200) |
|
RELIANCE |
FURNAS |
HITACHI |
DESCRIPTION |
|
45C937 |
Not Produced |
DRM-35 |
35mm DIN Rail Adapter |
|
45C938 |
96MCB01 |
CNM-06 |
0.6M Expansion Rack Cable |
|
45C999 |
96MAC01 |
CVM |
Blank Cover Plate |
| 45C973 | Not Produced | ActCab-EM2 | PC (9 pin) to EMII Programming Cable † |
| 45C974 | Not Produced | (obsolete) - available by special order | PC (25 pin) to EMII Programming Cable |
| 45C955 | Not Produced | ActCab-PGMJ2 | PGM-JR2 Serial Port to PC (9pin) Programming Cable † |
| 45C956 | Not Produced | (obsolete) - available by special order | PGM-JR2 Serial Port to PC (25pin) Programming Cable |
|
Two Expansion Racks Maximum are allowed, but the (EM/EMII) processor can only address ten usable slots. CNM-06 is used to connect racks. | |||
|
"3rd Party" Manufacture |
Notes |
DESCRIPTION |
|---|---|---|
| HE150ASC200 (HE-APG) | Manual Flyer | ASCII BASIC module for the Hitachi H252 PLC |
| HE150ETN100 (HE-APG) |
Manual Flyer | Ethernet TCP/IP module for the Hitachi H252 PLC |
| HE150ETN150 (HE-APG) | Manual Flyer | Ethernet communications module for the Hitachi H252 PLC |
| HE150RTU100 (HE-APG) |
Manual | Modbus Slave for the Hitachi H252 PLC |
| HE150THM180 (HE-APG) | Manual Flyer | Thermocouple module for Hitachi H250/252 PLC |
| HEC-ABM-222 | ||
| HEC-ABM-424 (Obsolete) | ||
| 45C THM (Obsolete) | ||
| 45C RLY | ||
| 45C RTD (Obsolete) | ||
| HEC-ADC-040 (Obsolete) | ||
HEC-ADC-080 |
Obsolete |
8-Channel Analog Input (12 Bit, 0-10V/4-20mA) |
|
HEC-DAC-040 |
Obsolete |
4-Channel Analog Output (12 Bit, 0-10V) |
|
HEC-DAC-080 |
Obsolete |
8-Channel Analog Output (12 Bit, 0-10V) |
|
HEC-DAC-044 (Reliance 45C761) |
Obsolete |
4-Channel Analog Output (12 Bit, 0-10V/ 4-20mA) |
| HEC-020-110 (Obsolete) | ||
|
HEC-NET-485
|
Networking Module | |
|
HEC-PID-XXX |
Obsolete |
PID Auto-tuning Controller |
| RT60 | Robotina d.o.o. | 6 channel RTD (PT100) & current (0(4) to 20mA) module, 12 bit res. |
| Actana -S2 | Actron A.B. | Analog module, 4 isolated (potential free) analog inputs, 2 analog outputs, 12 bit, selectable current or volt |
| Actana-S1 | Actron A.B. | Analog Module, 4 isolated (potential free) analog inputs, 12 bit, selectable E or I |
| Actana-F | Actron A.B. | Analog Module, 4 isolated inputs, 2 analog outputs, 12 bit, selectable E or I, 3 digital in, 2 digital outputs |
| ActNet-N | Actron A.B. | Multi-drop (RS485) and active serial port (RS232) |
| ActNet-S | Actron A.B. | Serial Port RS232 or Multi-Drop RS485 |
| ActNet-TM | Actron A.B. | Network Module for OP Terminals, Inverters and Slave PLCs |
| QHB01 | Drivetec | Axis Control Board, two counter inputs, 100kHz, two analog outputs, 15 bit |
| PBDP-S | Robotina d.o.o. | Profibus DP Slave Module |
|
Current "3rd Party" Manufactures include Actron A.B., Drivetec, Horner APG, and Robotina d.o.o. These components are certified by Hitachi, and built compliant with Hitachi standards and specifications. Use of these products is supported by Hitachi, and use does not invalidate the warranty. | ||
|
RELIANCE |
FURNAS |
HITACHI |
DESCRIPTION |
|
45C950 |
96MPG01 |
PGM-J |
Standard Hand-Held Programmer |
|
45C951 |
96MPG02 |
PGM-JR2 |
Universal Hand-Held Programmer EPROM Writer, RS232 Port |
|
45C936 |
96MAC02 |
PAM-E |
Programmer Mounting Adapter |
|
45C939 |
96MCB02 |
CNE-15 |
Programmer Extension Cable |
|
Not Produced |
Not Produced |
PGM-GPE2 |
Graphic Ladder Programmer |
|
RELIANCE |
FURNAS |
HITACHI |
DESCRIPTION |
|
45C152 |
96MPP03 (MacLola)
|
ActSip-E (DOS OS) Actron A.B. |
Programming Software, Keyboard Template, Getting Started Manual, Programming Manual, Cables, 31/2" Floppy |
|
45C153 |
Not Produced |
ActSip-E Upgrade |
Upgrade to Current ActSip-E Version (Free for 1 year) |
|
Not Produced |
96MCA02 + 96MCA01 + 96MCA04 |
ActCab-PGMJ + ActCab-Main EB + ActCab-9/25 |
Programming Cable - PGM-JR2 serial port to DB9 on (IBM)PC |
|
Not Produced |
96MCA02 + 96MCA01 |
ActCab-PGMJ + ActCab-Main EB |
Programming Cable - PGM-JR2 serial port to DB25 on (IBM)PC |
|
Not Produced |
96MCA03 + 96MCA02 + 96MCA04 |
ActCab-EM3 |
Programming Cable - CPM-E3 to DB9 on (IBM)PC |
|
Not Produced |
96MCA03 + 96MCA02 |
ActCab-E3 + ActCab-Main EB |
Programming Cable - CPM-E3 to DB25 on (IBM)PC |
|
| |||
©Copyright 2007 Lighthouse PLCs, Inc. All rights reserved. The text, images, graphics, sound files, animations, and their arrangement on our website are all subject to copyright and other intellectual property protection. These objects may not be copied for commercial use or distribution, nor may these objects be modified or reposted to other sites. This websites also contains images whose copyrights are attributable to third parties.
