Click here to go to the Main Page!Software : pocketPLC

Get a quote!

PLC PROGRAMMING & MONITORING: pocketPLC by Itcom
Creates, modifies, saves, writes and read a PLC program in “Instruction List mode” with your Palm or PDA. Also has a special module for Monitoring the PLC (HMI Interface), that allows verification of the operators values and value changes.
Flexibility, mobility and an inexpensive resource for programming and program modification makes a complete tool for technicians.
Programming: EC-Miracle Monitoring: EC-Spy
  • Supported Hitachi PLCs: EC Series, more coming soon!
  • Edit Programs: Edit programs in "Instruction List Mode". You can insert steps programs, delete steps and save hundreds of programs in your PDA or Palm. All the Basic Instruction (12), Application Instructions (21) and the Arithmetic function (36) you can use.
  • Monitor: Complete tool for Monitoring your PLC, you can see up to five different operator at the same time in static or cyclic form. For the case of the contacts you see the state ON or OFF, for the Timers or counters you see the Preset value, the Current value and the the State ON or OFF, for the case of register you can see in BCD or 16 bits format.
  • Write/Force Operators: You can force ON or OFF the operators like a M or T/C. Write values in the register in BCD or binary format. Write and change Current or Preset values in Timers or counters.
  • Read/Write: You can transfer programs from/to the PLC with your PDA. It allows mobility and flexibility for the technicians because with only the PDA you can read and save a program from the PLC.
  • Requirements:
Operative system : PALM O.S. 3.5 or higher.
Cables : For "Serial" port communication HotSync
Ex: Palm Vx, VIIx		 For "USB" port communication HotSync
Ex: Tungsten, M515
H-EC2PDA cable Cradle or Cable serial
and H-EC2PDA cable
  • Supported Hitachi PLCs: EC Series, more coming soon!
  • Monitor: Complete tool for Monitoring your PLC, you can see up to five different operator at the same time in static or cyclic form. For the case of the contacts you see the state ON or OFF, for the Timers or counters you see the Preset value, the Current value and the the State ON or OFF, for the case of register you can see in BCD or 16 bits format.
  • Write/Force Operators: You can force ON or OFF the operators like a M or T/C. Write values in the register in BCD or binary format. Write and change Current or Preset values in Timers or counters.
  • Read PLC Status: You can read the status of your PLC, like a CPU status, memory size and permissions.
    Also you can RUN or STOP manually the PLC.
  • Requirements:
Operative system : PALM O.S. 3.5 or higher.
Cables : For "Serial" port communication HotSync
Ex: Palm Vx, VIIx		 For "USB" port communication HotSync
Ex: Tungsten, M515
H-EC2PDA cable Cradle or Cable serial
and H-EC2PDA cable