CLICK HERE TO JUMP TO CABLES

»The following information is presented in an effort to "de-mystify" some of the models for which there is little information. Additionally, there is a source for S O M E of these units.  NOT in every case, but at least in some, there are some options - some "replacements".   These replacements are brand new, not rebuilt or remanufactured. They are made on the same assembly line as your original Mitsubishi, with the same quality parts. In fact, they even carry the same warranty!

(FXOn)/AXOn

The Mitsubishi FXon is no longer available. The AXon(FXon) range of products offer users certain model variations which can switch higher current output signals and receive AC input signals. As with all the Mitsubishi/Shihlin "brick" type controllers, the power supply, CPU and I/O components are presented in a single products. The AXon(FXon) is the smallest programmable controller of its kind. The AXon(FXon) is totally (100%) compatible in a programming sense with its (obsolete) AXo(FXo) counterpart.

FX1s/AX1s

The new FX1S SuperMicro Programmable Logic Controllers boasts integrated I/O, power supply and CPU in a "unitized" package. Every model packs an extensive instruction set and abundant user memory. No other controller is better suited to tackle modern automation demands in jobs ranging from the simplest and smallest I/O count, to those demanding the pinnacle of complexity and speed.

TOP

FX1n/AX1n

The FX1N takes the technology of the FX1S and applies it in a micro PLC with expansion capabilities. Extend your FX1N system up to 128 I/O, and add communications and analog I/O. In keeping with the FX1S, a wide variety of I/O options are available.

FX2n/AX2n

The FX1N takes the technology of the FX1S and applies it in a micro PLC with expansion capabilities. Extend your FX1N system up to 128 I/O, and add communications and analog I/O. In keeping with the FX1S, a wide variety of I/O options are available.

If you have one of these models, you may be able to upgrade to a FX1s or FX1n (more probably FX3G and FX3U). The problem with the F, F1, and F2, is retrieving the program. The hand-held programmer and the serial interface units are no longer available, so there is no way to "download" the program for use in the new PLCs. Interface cables are available for the FX, FXo and FXos. MEDOC programming software is still available, but you need a cable for the FX and/or FXos. If you are lucky enough to have the interface unit (i.e. F2-20GF1 or F-Link) for the F1/F2, MEDOC will work and allow you to download. (By the way, the F2-20GF1, F-Link and A-Link are worth their weight in gold).

AX2n Accessories

        (*)Previously this item was (incorrectly) listed as AX2n-20P-E-SET0 .  We apologize for any inconvenience.  AX-20P-E-SET0 is the correct part number.  This hand-held programmer will work on the Mitsubishi FX2n and/or Shihlin AX2n PLCs (as well as previous FX/AX models).

TOP

Having trouble figure out which cable is which?  Check Here...

Cables for connection of Misubishi PLCs to a Personal Computer

Things to remember.

• F, F1, and F2 PLCs do not have a connector on the PLC. An interface module is required. The partnumber for this module is; F2-20GF1. A PCX-KIT-1 is also required.
• FX0, FX0s, FX0N PLCs require a cable adapter for the 8-pin mini-DIN connector

This cable is sometimes called the "Hypercable". This was the original programming cable made available from Mitsubishi.
 Similar to the SC09 and SC05-N, the RS-232 to RS-422 converter is built into the cable assembly.
However unlike the SC09 and SC05-N, the converter draws power from the (Personal Computer) PC communications Port to power the converter.
 Because of this, it will work with F, F1, and F2 PLCs.

There are known communication problems with this cable and certain older model laptops that haveswitching Power Supplies and the A1NCPU.
This cable works with the AnN, AnA, AnS, F, F1, F2, FX, FX0, FX0N, FX0S series PLCs. To use this cable with the FX0, FX0N, FX0S PLCs, a FX-20P-CADP is requried. This cable can still be purchased. Contact your local Sales Representive.

Because of the known problems, it is suggested that you not use this cable with newer model Notebook computers.
These computers do not provide enough power through the com port to properly power the converter.
Some units do not provide any power through the com port.
It is suggested that you use an SC09 for all FX and A Series PLCs and use the PCX-KIT-1 for all F/F1/F2 PLCs.

PCX-KIT-1

  Because of the known problems with the PCX-CBL-9/25P, Mitsubishi put together the PCX-KIT-1. This  setup includes cables, the RS-232 to RS-422 converter and a power supply for the converter. This cable works with all Mitsubishi PLCs. The PCX-KIT-1 is the prefered cable for communications with F, F1 and F2 PLCs. This is the only cable Mitsubishi supports for use with these PLCs. The PCX-KIT-1 is also requried for connection of a GPP to your PC.

 The NEW kid in town : AX-232AW-S

Just about any one who has ever worked with Mitsubishi PLCs, has at one time or another used the SC-90, whether they remember it or not.  The SC-09 is a great cable.  There is a new "kid" in town however, that is giving the SC-09 a "run for its money".  The AX-232 AW-S is basically the same as the SC-09, but is primarily intended to be marketed in Asia.  UPSIDE?  The AX-232A2-S has - on the connector shell which contains the electroncs (the RS422 to RS232 Converter) - "Link" and "Transmit" LEDs.  This is an awesome addition, and can really help "de-mystify" some communication problems.  DOWNSIDE?  It is grey instead of red.  We know that is a big disappointment to some, but it seems you can't have everything.  UPSIDE ? (Part Deux)  The AX232-AW-S is about 10% less money than the SC-09.

	SC09 RS232/RS422 interface,3 meters length.Standard programming cable for all Mitsubishi MELSEC FX and A series PLC's.
	SC10 PLC remote communication with modem,go on long-distance communication for FX series(FX2/FX2n/FX0/FX0n..)PLC with modem connecting telephone wire,the other function is the same as SC-09.
	USB-SC09 USB/RS422 interface,adapter for Mitsubishi FX & A series PLC,3 meters,with communication indicator, the largest communication distance of up to 2 kilometers.
FX-20P-CAB	Mitsubishi FX programming to FX2 series PLC tie cable, 2 meters.
FX-20P-CADP	Mitsubishi FX0/AX2n series PLC general suitably matches the electric cable,0.3 meters
FX-50DU-CAB0	Mitsubishi FX0/AX2n series PLC lies between the surface DU connected electric cable,3 meters with the man-machine.
FX-40DU-CAB	Mitsubishi FX2/A series PLC lies between the surface connected electric cable,3 meters with the man-machine.
FX-232CAB-1	Mitsubishi F940 touches the screen programming electric cable, 2 meters. Lies between the surface tie cable
FX9GT-CAB0	FX0s/FX0n/AX2n to the GOT900 man-machine, 3 meters.
AC30R4-25P	Lie between the surface tie cable FX2, A series PLC to the GOT900 man-machine, 3 meters.
FR-CB201	The Mitsubishi A540 frequency changer kneading board extends the electric cable,5 meters.
FR-485	The Mitsubishi A540 frequency changer to the computer connection transformation electric cable, the RS232/RS485 connection, uses in the frequency changer computer machine supervisory system, the communication is away from 1.2 kilometers.
FR-485+	Photoelectric isolation FR-485 connection transformation electric cable, function same.
FX-MON	Mitsubishi FX series PLC graph monitoring software, moves to the DOS environment, has Chinese to lie between the surface, through SC-09 or SC-09+, the SC-10 connection computer and PLC, contains the SC-09 connection.
NOTE:  Many of these cables are now obsolete and are presented for reference only.

TOP

©Copyright 2007 Lighthouse PLCs, Inc. All rights reserved. The text, images, graphics, sound files, animations, and their arrangement on our website are all subject to copyright and other intellectual property protection. These objects may not be copied for commercial use or distribution, nor may these objects be modified or reposted to other sites. This websites also contains images whose copyrights are attributable to third parties.